Scanning with no Results

I installed a new GVM on Kali Linux … When I scan a host the scan finished after 10 seconds without results. When I make a nmap Scan I get a lot of open ports
Not shown: 987 closed ports
PORT STATE SERVICE
25/tcp open smtp
53/tcp open domain
80/tcp open http
111/tcp open rpcbind
143/tcp open imap
389/tcp open ldap
443/tcp open https
465/tcp open smtps
587/tcp open submission
636/tcp open ldapssl
993/tcp open imaps
5666/tcp open nrpe
9102/tcp open jetdirect
MAC Address: C6:CC:D4:9A:1C:58 (Unknown)

When I start the scan with gvm/gsa I got this
sd main:MESSAGE:2021-03-03 18h43.42 utc:9340: Vulnerability scan a1dcbc4a-70cb-46e0-8c37-fbe554c49067 started for host: XX.XX.248.211 (Vhosts: hoss.suxmen.de)
sd main:MESSAGE:2021-03-03 18h43.58 utc:9340: Vulnerability scan a1dcbc4a-70cb-46e0-8c37-fbe554c49067 finished for host XX.XX.248.211 in 15.51 seconds
sd main:MESSAGE:2021-03-03 18h43.58 utc:9339: Vulnerability scan a1dcbc4a-70cb-46e0-8c37-fbe554c49067 finished in 17 seconds: 1 hosts

ping icmp detection is on and i get a reply …

this is a strace to the pid of the openvas scanner to check which files are attached

strace -p 628 -e trace=file -f 2>&1 | grep nasl 130 ⨯
[pid 14510] openat(AT_FDCWD, “/lib/libopenvas_nasl.so.20”, O_RDONLY|O_CLOEXEC) = 3
[pid 14511] openat(AT_FDCWD, “/lib/libopenvas_nasl.so.20”, O_RDONLY|O_CLOEXEC) = 3
[pid 14513] openat(AT_FDCWD, “/lib/libopenvas_nasl.so.20”, O_RDONLY|O_CLOEXEC) = 3
[pid 14515] openat(AT_FDCWD, “/lib/libopenvas_nasl.so.20”, O_RDONLY|O_CLOEXEC) = 3
[pid 14526] openat(AT_FDCWD, “/var/lib/openvas/plugins/toolcheck.nasl”, O_RDONLY) = 4
[pid 14531] openat(AT_FDCWD, “/var/lib/openvas/plugins/ping_host.nasl”, O_RDONLY) = 4
[pid 14537] openat(AT_FDCWD, “/var/lib/openvas/plugins/gcf/gb_outdated_scan_engine.nasl”, O_RDONLY) = 4
[pid 14538] openat(AT_FDCWD, “/var/lib/openvas/plugins/Policy/GaussDB/gaussdb_authentication_information.nasl”, O_RDONLY) = 4
[pid 14540] openat(AT_FDCWD, “/var/lib/openvas/plugins/gaussdbkernel_authentication_information.nasl”, O_RDONLY) = 4
[pid 14541] openat(AT_FDCWD, “/var/lib/openvas/plugins/opengauss_authentication_information.nasl”, O_RDONLY) = 4
[pid 14542] openat(AT_FDCWD, “/var/lib/openvas/plugins/compliance_tests.nasl”, O_RDONLY) = 4
[pid 14544] openat(AT_FDCWD, “/var/lib/openvas/plugins/global_settings.nasl”, O_RDONLY) = 4
[pid 14546] openat(AT_FDCWD, “/var/lib/openvas/plugins/http_ids_evasion.nasl”, O_RDONLY) = 4
[pid 14547] openat(AT_FDCWD, “/var/lib/openvas/plugins/ids_evasion.nasl”, O_RDONLY) = 4
[pid 14548] openat(AT_FDCWD, “/var/lib/openvas/plugins/gb_esxi_authorization.nasl”, O_RDONLY) = 4
[pid 14549] openat(AT_FDCWD, “/var/lib/openvas/plugins/ssh_authorization_init.nasl”, O_RDONLY) = 4
[pid 14550] openat(AT_FDCWD, “/var/lib/openvas/plugins/smtp_settings.nasl”, O_RDONLY) = 4
[pid 14551] openat(AT_FDCWD, “/var/lib/openvas/plugins/secpod_ssl_ciphers_setting.nasl”, O_RDONLY) = 4
[pid 14552] openat(AT_FDCWD, “/var/lib/openvas/plugins/logins.nasl”, O_RDONLY) = 4
[pid 14553] openat(AT_FDCWD, “/var/lib/openvas/plugins/lsc_options.nasl”, O_RDONLY) = 4
[pid 14554] openat(AT_FDCWD, “/var/lib/openvas/plugins/pre2008/TLD_wildcard.nasl”, O_RDONLY) = 4
[pid 14555] openat(AT_FDCWD, “/var/lib/openvas/plugins/smb_authorization.nasl”, O_RDONLY) = 4
[pid 14556] openat(AT_FDCWD, “/var/lib/openvas/plugins/gb_dont_scan_fragile_device.nasl”, O_RDONLY) = 4
[pid 14557] openat(AT_FDCWD, “/var/lib/openvas/plugins/nmap_mac.nasl”, O_RDONLY) = 4
[pid 14558] openat(AT_FDCWD, “/var/lib/openvas/plugins/gb_default_credentials_options.nasl”, O_RDONLY) = 4
[pid 14561] openat(AT_FDCWD, “/var/lib/openvas/plugins/gb_open_udp_ports.nasl”, O_RDONLY) = 4
[pid 14562] openat(AT_FDCWD, “/var/lib/openvas/plugins/gb_snmp_authorization.nasl”, O_RDONLY) = 4
[pid 14563] openat(AT_FDCWD, “/var/lib/openvas/plugins/dont_print_on_printers.nasl”, O_RDONLY) = 4
[pid 14564] openat(AT_FDCWD, “/var/lib/openvas/plugins/dont_scan_printers.nasl”, O_RDONLY) = 4
[pid 14565] openat(AT_FDCWD, “/var/lib/openvas/plugins/find_service.nasl”, O_RDONLY) = 4
[pid 14566] openat(AT_FDCWD, “/var/lib/openvas/plugins/secpod_open_tcp_ports.nasl”, O_RDONLY) = 4
[pid 14567] openat(AT_FDCWD, “/var/lib/openvas/plugins/netbios_name_get.nasl”, O_RDONLY) = 4
[pid 14568] openat(AT_FDCWD, “/var/lib/openvas/plugins/os_fingerprint.nasl”, O_RDONLY) = 4
[pid 14569] openat(AT_FDCWD, “/var/lib/openvas/plugins/GSHB/GSHB_WMI_OSInfo.nasl”, O_RDONLY) = 4
[pid 14576] openat(AT_FDCWD, “/var/lib/openvas/plugins/os_detection.nasl”, O_RDONLY) = 4
[pid 14590] openat(AT_FDCWD, “/var/lib/openvas/plugins/2018/gb_portscanner_missing.nasl”, O_RDONLY) = 4
[pid 14604] openat(AT_FDCWD, “/var/lib/openvas/plugins/2013/gb_os_eol.nasl”, O_RDONLY) = 4
[pid 14605] openat(AT_FDCWD, “/var/lib/openvas/plugins/secspace_traceroute.nasl”, O_RDONLY) = 4
[pid 14628] openat(AT_FDCWD, “/var/lib/openvas/plugins/pre2008/tcp_port_zero.nasl”, O_RDONLY) = 4
[pid 14645] openat(AT_FDCWD, “/var/lib/openvas/plugins/pre2008/hello_detect.nasl”, O_RDONLY) = 4
[pid 14646] openat(AT_FDCWD, “/var/lib/openvas/plugins/pre2008/egp_detect.nasl”, O_RDONLY) = 4
[pid 14647] openat(AT_FDCWD, “/var/lib/openvas/plugins/2008/icmp_domain_name.nasl”, O_RDONLY) = 4
[pid 14648] openat(AT_FDCWD, “/var/lib/openvas/plugins/2011/gb_icmp_timestamps.nasl”, O_RDONLY) = 4
[pid 14649] openat(AT_FDCWD, “/var/lib/openvas/plugins/pre2008/ip_protocol_scan.nasl”, O_RDONLY) = 4
[pid 14650] openat(AT_FDCWD, “/var/lib/openvas/plugins/2009/macosx_version.nasl”, O_RDONLY) = 4
[pid 14651] openat(AT_FDCWD, “/var/lib/openvas/plugins/ospf_detect.nasl”, O_RDONLY) = 4
[pid 14715] openat(AT_FDCWD, “/var/lib/openvas/plugins/pre2008/scan_info.nasl”, O_RDONLY) = 4
[pid 14716] openat(AT_FDCWD, “/var/lib/openvas/plugins/host_scan_end.nasl”, O_RDONLY) = 4
[pid 14717] openat(AT_FDCWD, “/var/lib/openvas/plugins/2016/sw_vt_debugging.nasl”, O_RDONLY) = 4
[pid 14718] openat(AT_FDCWD, “/var/lib/openvas/plugins/cpe_inventory.nasl”, O_RDONLY) = 4
[pid 14719] openat(AT_FDCWD, “/var/lib/openvas/plugins/gb_hostname_determ_reporting.nasl”, O_RDONLY) = 4
[pid 14720] openat(AT_FDCWD, “/var/lib/openvas/plugins/Policy/gb_policy_cpe.nasl”, O_RDONLY) = 4
[pid 14721] openat(AT_FDCWD, “/var/lib/openvas/plugins/2011/host_details.nasl”, O_RDONLY) = 4

any ideas?

Probably also solved with A custom scan configuration is in use without having a Port scanner from the 'Port scanners' family enabled?

Could you also please edit the topic and change the category to the https://community.greenbone.net/c/gse/16 one because this isn’t a question about the GMP protocol?

2 Likes